Category: ARDUINO MKR WAN 1300 (LORA CONNECTIVITY)
ARDUINO MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.
The Arduino MKR WAN 1300 board provides a practical and cost-effective solution to add LoRa connectivity to projects requiring low power. This open-source board can be connected to the Arduino IoT Cloud, your own LoRa network using the Arduino LoRa PRO Gateway, existing LoRaWAN infrastructure like The Things Network, or even other boards using the direct connectivity mode.
| Model Type | MKR WAN 1300 |
| Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM |
| Operating Voltage (VDC) | 3.3 |
| Input Voltage(Recommended) | 5V |
| Antenna power | 2dB |
| Carrier Frequency | 433/868/915 MHz |
| Analog I/O Pins | Input Pins 8 : (ADC 8/10/12 bit) Output Pins : 1 (DAC 10 bit) |
| Digital I/O Pins | 8 |
| PWM Output Pins | 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 – or 18 -, A4 -or 19) |
| Clock Speed | 32.768 kHz (RTC) 48MHz |
| DC Current per I/O Pin (mA) | 7 |
| Flash Memory | 256 KB |
| EEPROM | None |
| SRAM (KB) | 32 |
| Length (mm) | 67.6 |
| Width (mm) | 25 |
| Height (mm) | 10 |
| Weight (gm) | 32 |
| Shipment Weight | 0.04 kg |
| Shipment Dimensions | 7 × 3 × 2 cm |
Be First To Rate.
Data Not Available
